|
|
|
|
|
|
|
CORNER POST SPECIALS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Last Updated
11/19/08 09:58 AM |
|
| |
--
|
|
|
 We will look over
your needs & locate the
best possible match for your Toxic Black Mold
Identification & Elimination request!
We
Check each contractors Certifications.
We
Check References for Quality Workmanship.
We
Check Insurance for Your Protection.
We
Check with Local Better Business Bureaus.
We
follow up on each request to ensure Quality Services. |
|
|
|
Toxic Black
Mold
Inspection & Mold Testing Procedures |
|
--
I.
Bulk/Surface Sampling |
A
certified black mold testing inspector, trained in appropriate
sampling methodology, will carry out all necessary bulk
or surface sampling. Bulk/Surface sampling is essential
if the building residents are suffering from health
problems, which are or may be connected with fungal
exposure. Bulk/Surface sampling is also crucial to
identify the presence or absence of mold if a visual
inspection is unclear (e.g. discoloration and staining).
Bulk samples are collected from visibly moldy surfaces
by scrapings or cuttings. Surface samples are collected
by wiping a select area with a sterile swab or by
stripping the surface with clear tape. The dish is then
nurtured in a special incubator that is high in humidity
and void of all ambient light at a temperature suitable
for fungal development. |
|
The most precise mold
identification is only achievable after seven days of
live culturing for the mold cultures to reach their
highest identification growth. After seven days of
incubation, the fungal samples are taken and identified
down to genus and to species (back
to top /
find a Pro ) |
|
II. Air
Monitoring |
 Mold
Inspection firms use a Bio-Aerosol Sampler for its air
sampling. This sampler collects viable spores on potato
dextrose agar petri dishes placed in the apparatus at a
rate of 28.3 cubic liters of air per minute. Results
shall be presented in colony forming units per cubic
meter of air.
Air monitoring is the most accurate way to evaluate the degree of
contamination within the home. Air monitoring is
essential if mold growth is suspected in a specific area
of the home or building, but cannot be pinpointed
visually. The principle behind such air monitoring is to
establish the location and/or extent of mold
contamination.
Air monitoring may be necessary if the building
inhabitants are suffering from health issues, which are
or may be linked with fungal exposure. Air monitoring is
also used for comparative purposes. An outdoor control
air test is taken to determine whether mold is being
amplified internally.
Air monitoring is also crucial if the building
inhabitants are suffering from health issues, which are
or may be linked with fungal exposure. Air monitoring is
also used for comparative purposes. The outdoor control
air test is very helpful in assessing whether there is
an internally produced mold problem.
(back
to top /
find a Pro )
-- |
|
|
--
Toxic
Black Mold Identification,
Protection & Elimination
-
A Note to our Toxic Black Mold, Health, Indoor Air Quality & Air Purifier Visitors.
Please Remember that Toxic Black Mold & Bad Indoor Air Quality Can Be Dangerous to Your Health. Never Touch or Go Near Suspected Toxic Black Mold without Proper Protective Gear. Do Not Breathe In Toxic Mold If At All Possible. Our Toxic
Black Mold Solutions Section
& Pre-Screened Professionals provide permanent solutions to Eliminate Toxic
Black Molds from your life & Improve your Health. Utilize our Toxic
Black Mold Services throughout the site. We have Toxic
Black Mold
Inspectors and
Remediation Contractors. We also offer a Variety of Health Related Products to our visitors, including
Ionic Air Purifiers,
Do It Yourself Toxic Black Mold Test Kits
&
Toxic Mold Remover. Ionic and Hepa Purifiers can assist in the Elimination of
Toxic
Black Mold in the Air you Breathe! Our Services are Always
FREE
to Our Visitors!
--
|
|
|
Serving
Communities in the Following States. |
• Alabama
• Alaska
• Arizona
• Arkansas
• California
• Colorado
• Connecticut
• Delaware
• Florida
• Georgia
• Hawaii |
• Idaho
• Illinois
• Indiana
• Iowa
• Kansas
• Kentucky
• Louisiana
• Maine
• Maryland
• Massachusetts
|
• Michigan
• Minnesota
• Mississippi
• Missouri
• Montana
• Nebraska
• Nevada
• New Hampshire
• New Jersey
• New Mexico
|
• New York
• North Carolina
• North Dakota
• Ohio
• Oklahoma
• Oregon
• Pennsylvania
• Rhode Island
• South Carolina
• South Dakota
|
• Tennessee
• Texas
• Utah
• Vermont
• Virginia
• Washington
• Washington, D.C.
• West Virginia
• Wisconsin
• Wyoming |
Some cities & states powered by
-
The Personal Information that you give us in this form WILL NOT be shared, sold or
used for any other reason except to find a Local Mold Professional per your request!
We Respect Your Privacy!
Another great service from your Toxic Mold Solutions partners at
--
 StartRemodeling.com
©
1997 - 2008
All Rights Reserved
ToxicMoldUSA.com -
CustomerService@startremodeling.com
All rights reserved. Revised:
August 06, 2008 | |
| |
|
